DaveInVA wrote: 
This one takes me back. My buddy who bought it first had recently picked up a B&O turntable that he liked to turn on it's side while playing this album. I guess we were easily amused. 

 swell_sailor wrote: 
It's aged really well also, the music still sounds fresh.

 DaveInVA wrote: 
Great clean sound for it's vintage, I think. This is a plain, nothing special, original release, but it still plays really well for some reason. 

Edit:
I also have a very clean Mofi The Nightfly, which sounds exceptionally good. I might spin it a little later.

 DaveInVA wrote: 
You ain't just whistlin' Dixie there, mister!

 swell_sailor wrote: 
Great album!

Steely Dan, Aja, as I type this.

Suzanne Vega - Self Titled - On a Suzanne Vega roll for a while here with several UK 45 rpm EP's next



Tom's Diner - 45 rpm UK EP



Gypsy - 45 rpm UK EP



Luka - 45 rpm UK EP



Marlene on the Wall - 45 rpm UK EP

Don Henley - Building the Perfect Beast - Gold Stamp Promo

 ScottFromWyoming wrote: 
I gots dat one...

 Servo wrote: 

 
Original sleeve was 6-sided. See later 4-sided sleeve where the "missing" area is filled in with black or purple(!).

 DaveInVA wrote: 
I don't think so.

Clipping corners, using a hole punch and other methods of permanently marking a LP sleeve was a common method of marking items for clearance.

 DaveInVA wrote: 
What?  No mention at all of Joe Grado's line of value cartridges?  What are they, chopped liver?

I've always liked having a separate phono preamp, not only because it allows better control of gain vs. noise, but because the RIAA de-emphasis section belongs apart from the linear part of the chain (IMO, of course).

My first "good" cartridge was a short-lived (because it sucked) design that used strain guage sensor.

No Virginia, diamonds aren't forever sometimes...

 cc_rider wrote: 
Do you mean the Telarc version?  "Digital cannons"?

Yup, that was a digitally recorded record, one of the first.  Yup, it sounds a LOT more impressive when you remove the limitations of vinyl.

 DaveInVA wrote: 
I'll second that.

BillG, are you watching?

 Zep wrote:  I have one,never played.

 Zep wrote: 
Yes the original release of those 2 LP's on the Island records label had the corners clipped. The one I played today is a later re-release and they used a standard jacket with that.

 black321 wrote: 
I just realized I forgot to mention cartridges. There are Moving Magnet (MM) and Moving Coil (MC). There have been other types such as Moving Iron (such as AKG) and Condensor (such as MicroAcoustisc). The most prevalent are MM and MC. There are 2 types of MC, Low Output (LO) and High Output (HO). While there are some very nice sounding MM cartridges such as the old Grace F9R (Ruby) the Moving Coil cartridges are generally better due to the lower mass of their design. When using a Low Output MC cartridge you need a preamp with a Moving Coil Preamp or Step-Up device (transformer). About 40 db of gain is needed for MM and approx 60 db for LO-MC. High Output Moving Coil cartridges are a compromise.  They need more coil winding to produce the higher output and that increases the mass. There are some decent sounding HO MC cartridges but they are not as good as a LO MC can be. The advantage of using a HO MC is that you generally need no step-up device or moving coil preamp. The catch 22 with using a LO MC is that the Moving Coil Preamp (also called head amps or pre preamps) or step up device has to be a good one or you are just wasting the cartridge. Most mid-fi receivers and preamps that have built in MC preamps are mediocre. In my experience the LO MC cartridges that have the best detail have solid Ruby or Sapphire cantilevers. Some have "Micro Reach" cantilevers which lower the mass even more. If you have a decent turntable with a lower medium to low mass arm then something like a Dynavector Ruby, 23MR, 17 series, Sumiko Talisman etc will work great. Some of these cartridges are not made anymore but there is a place called Soundsmith that can retip most popular MC cartridges and even make them better than they were new. Sometimes it pays to buy an old Dynavector with a bad stylus and get it rebuilt by him. He does an excellent job. As for new cartridges in addition to the Dynavector 17 I recommend the Denon DL-301MK2 for medium to low mass arm or the excellent for the money Denon DL-103 for medium to higher mass arms. Soundsmith also offers a line of excellent brand new cartridges he builds. Hope this rambling helps some!

 DaveInVA wrote: 
I had a copy of this (and "Shootout") where the UR and LL corners were clipped.

 cc_rider wrote: 
I mentioned that Telarc 1812 Overture in my original response to the OP. That took a really good tonearm/cartridge combo to track. There were many test records available that had trackablity test tracks for testing how well your tonearm/cartridge worked. I had a Souther SL-3 with a Dynavector Ruby and it had no problem with that track at all....Doesn't work well with a Dual 1229 and midfi Shure/Empire/Audiotechnica though....

 cc_rider wrote: